Establishing Authentication - Cisco ATA-186 Administrator's Manual

Important Basic SIP Services
Table 4-1 Required SIP Parameters and Defaults
Parameter Value Type
SIPRegInterval, Integer
page 5-15
MAXRedirect, Integer
page 5-15
SIPRegOn, page Integer
5-16
NATIP, page 5-16 IP address
SIPPort, page Integer
5-17
MediaPort, page Integer
5-17
OutBoundProxy, Alphanumeric
page 5-17 string
GkOrProxy, page Alphanumeric
5-10 string
UseSIP, page 5-14 Boolean
ToConfig, page Boolean
5-4

Establishing Authentication

The Cisco ATA supports two levels of authentication, depending on the setting of the UseLoginID
parameter:
•
•
Related Configuration Parameters
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
4-2
Description
Seconds between registration renewal
Maximum number of times to try
redirection
Enable SIP registration
WAN address of the attached router/NAT;
currently only used to support SIP behind
a NAT.
Port to listen for incoming SIP requests
Base port to receive RTP media; only used
to support SIP behind a NAT
Proxy server for all outbound SIP requests.
All SIP requests are sent to
OutBoundProxy, when configured, instead
of to the configured GkOrProxy.
SIP proxy server address or registrar
address.
Set to 1 for SIP mode.
Set to 0 after you have completed
configuration of the Cisco ATA. If this
value remains at 1, the Cisco ATA will
unnecessarily continue to contact the
TFTP server.
If UseLoginID is set to 0, the user ID (UID0 or UID1) is used with a user-supplied password (PWD0
or PWD1) for authentication.
If UseLoginID is set to 1, you must supply a login ID (LoginID0 or LoginID1) and a password
(PWD0 or PWD1) for authentication.
UseLoginID, page 5-11
UID0, page 5-9
UID1, page 5-9
Chapter 4 Basic and Additional SIP Services
Voice
Menu
Access Minimum Maximum
Code Value Value
203 1 86400
202 0 10
204 0 1
200 0 255
201 1 65535
202 1 65535
206 — —
5 — —
38 — —
80001 — —
Default
3600
5
0
0.0.0.0
5060
16384
0
0
0
1
OL-3410-01