Entering Alphanumeric Values - Cisco ATA-186 Administrator's Manual

Chapter 3 Configuring the Cisco ATA for SIP
Table 3-5
Voice Menu
Number
22
23
Follow the voice prompts and enter the appropriate values, then press the # key.
Step 4
Note
Note
The voice configuration menu repeats the value you entered, then prompts you to press one of the
following keys:
•
•
•
•
Press the # key after you have entered the desired key. If you do not press the # key, the system will
Step 5
automatically timeout after 10 seconds.
Cisco strongly recommends that you set a password. Use the voice menu code 7387277 (SETPASS) to
Step 6
configure a password through the voice configuration menu, after which you are prompted for the
password whenever you attempt to change a parameter value.
Step 7 After completing the configuration through the voice configuration menu, press the # key to exit.
Hang up the telephone. The Cisco ATA configuration refreshes. The function button fast-blinks when
Step 8
the refresh completes.

Entering Alphanumeric Values

Some voice configuration menu options require you to enter alphanumeric characters. Alphanumeric
entry differs from numeric entry because you must press # after each character selected.
If you need to enter an alphanumeric value, the voice prompt tells you to enter an alphanumeric value;
otherwise, enter a numeric value (0 to 9).
Table 3-6
Using
needed to select the number, letter, or symbol required. For example, to enter 58sQ, you would enter:
OL-3410-01
Parameters that Provide Basic IP Connectivity for the Cisco ATA (continued)
Features
Review the default router for the Cisco ATA to use.
Review subnet mask of the Cisco ATA.
Use the * key to indicate a delimiter (dot). For example, to enter an IP address of 192.168.3.1,
you would enter 192*168*3*1 on your telephone keypad.
When entering values for a field that contains a hexadecimal value, you must convert the
hexadecimal value to a decimal value in order to enter it into the voice configuration menu
system. For example, to enter the hexadecimal value 0x6A, you would enter the number 106 on
the telephone keypad.
1=Change your entered value
2=Review your entered value
3=Save your entered value
4=Review the current saved value
lists the keys on a telephone keypad and their respective alphanumeric characters.
Table 3-6 as a guide, enter the appropriate number key on the telephone keypad as many times as
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
Voice Configuration Menu
3-17