Gateway; Gateway2; Useloginid - Cisco ATA-186 Administrator's Manual

Chapter 5 Parameters and Defaults
Range
Maximum number of characters: 31
Default
0—Disables proxy registration and proxy-routed calls.
In this case, you can make direct IP calls by dialing the user-id@IP:port of the callee, where user-id must
be a numeric value, '@' is dialed as "**", and '.' and ':' are dialed as a '*'.
The following list shows some examples of direct SIP IP dialing:
•
•
•
Voice Configuration Menu Access Code
5

Gateway

Description
Not applicable to SIP.

Gateway2

Description
Not applicable to SIP.

UseLoginID

Description
0—Use UID0 and UID1 as the authentication ID.
1—Use LoginID0 and LoginID1 as the authentication ID.
Value Type
Boolean
Range
0 or 1
Default
0
Voice Configuration Menu Access Code
93
OL-3410-01
1234**192*168*1*10*5060
102*210*9*101*5061
4084281002**100*123*89*10
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
Account Information Parameters
5-11