Cisco ATA-186 Administrator's Manual page 32

Installation Procedure
Figure 2-1
Analog telephones
Figure 2-2
Analog telephones
Procedure
Step 1 Place the Cisco ATA near an electrical power outlet.
Step 2 Connect one end of a telephone line cord to the Phone 1 input on the rear panel of the Cisco ATA.
Connect the other end to an analog telephone set.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
2-4
Cisco ATA 186 Rear Panel Connections
PHONE 1 PHONE 2 10BaseT
IP network
(or fax)
5V power
adaptor
Cisco ATA 188 Rear Panel Connections
PHONE 1 PHONE 2 LINK 10/100 PC
IP network
(or fax)
5V power
PC
adaptor
ACT 5V
Power outlet
Power cord
10/100 UPLINK LINK 5V
Power outlet
Power cord
Chapter 2 Installing the Cisco ATA
OL-3410-01