Ipdialplan; Dialplan - Cisco ATA-186 Administrator's Manual

Optional Feature Parameters

IPDialPlan

Description
This Iparameter allows for detection of IP-like destination address in DialPlan. Three values are valid:
•
•
•
All other values are currently undefined.
Value Type
Integer
Range
0, 1 or 2
Default
1
Voice Configuration Menu Access Code
310

DialPlan

Description
The programmable dial plan is designed for the service provider to customize the behavior of the
Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify
the events that trigger the sending of dialed digits. These events include the following:
•
•
•
•
Value Type
Alphanumeric string
Range
Maximum number of characters is 199.
Default
*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
Voice Configuration Menu Access Code
926
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
5-38
0—String is dialed as is and not treated as an IP address.
1—When the Cisco ATA detects two asterisks (**), IPDialPlan takes over. The user enters the pound
(#) key to terminate the digit collection, and the interdigit timeout default is not used.
2—When IPDialPlan is set to 2, three asterisks (***) are required for IPDialPlan to take effect.
The termination character has been entered.
The specified dial string pattern has been accumulated.
The specified number of dialed digits has been accumulated.
The specified inter-digit timer has expired.
Chapter 5 Parameters and Defaults
OL-3410-01