Setting The Codec; Configuring Refresh Interval; Additional Sip Services - Cisco ATA-186 Administrator's Manual

Analog telephone adaptor
Hide thumbs Also See for ATA-186:
Table of Contents

Advertisement

Chapter 4
Basic and Additional SIP Services

Setting the Codec

The LBRCodec (low-bit-rate codec) parameter determines whether the G.723 or G.729A codec, in
addition to G.711A-law and G.711µ-law, can be used for receiving and transmitting. For configuration
information, see the

Configuring Refresh Interval

When the value specified in the CfgInterval parameter is reached, the Cisco ATA attempts to refresh its
configuration file from the TFTP server. By opening a web page for the Cisco ATA, you can perform a
refresh before the scheduled refresh. Set the CfgInterval parameter to an interval value (in seconds) for
refreshing the Cisco ATA configuration file. Cisco recommends that the interval be semi-random to
prevent many simultaneous contacts with the TFTP server. For more information, see the
section on page
When the Cisco ATA contacts the TFTP server, it also checks to see if an upgrade signaling image has
been placed on the TFTP server. If such an image exists, the Cisco ATA will download this image.

Additional SIP Services

This section describes additional SIP services and, where applicable, provides configuration information
and cross references to the parameters for configuring these services. These services are listed
alphabetically.
OL-3410-01
LoginID0, page 5-12
LoginID1, page 5-12
PWD0, page 5-9
PWD1, page 5-10
"LBRCodec" section on page
5-5.
Advanced Audio Configuration, page 4-4
Billable Features, page 4-4
Comfort Noise During Silence Period When Using G.711, page 4-5
Configurable Hook Flash Timing, page 4-5
Configurable Mixing of Call Waiting Tone and Audio, page 4-5
Configurable On-hook delay, page 4-5
Debugging Diagnostics, page 4-5
Dial Plan, page 4-6
Disabling Access To The Web Interface, page 4-6
Distinctive Ringing, page 4-6
DNS SRV Support, page 4-6
Hardware Information Display, page 4-7
NAT Gateway, page 4-7
NAT/PAT Translation, page 4-7
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
5-20.
Additional SIP Services
"CfgInterval"
4-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata188-i1Ata 188

Table of Contents