Making A Group Call; Making An Unaddress Call - Kenwood TKR-D710 Function Reference

7 DMR DIGITAL COMMUNICATION

7.7 Making a Group Call

7.7 Making a Group Call
By using Selcall on PTT, a Group Call can be made for the specified Group ID.
Group Call can be used to establish group voice communications by initiating a call to a group.
To make a Group Call, "Group Call" needs to be configured in Selcall on PTT and the target Group ID to be called
needs to be configured by using KPG-174D. A Group Call is initiated by selecting the DMR digital channel where the
target Group ID to be called by Selcall on PTT is configured and then pressing the PTT (microphone) switch.
All subscriber units having the same Group ID can be called. Also, specifying the Group ID for which "ALL" is
configured, all subscriber units can be called.
Note
To use this function, the same Group ID needs to be configured for the target subscriber unit to be called.
Configuration using KPG-174D
• Configuring Selcall on PTT (
• Configuring Group ID (
7.8

Making an Unaddress Call

Unaddress Call can be used for a subscriber unit normally belonging to a different group to establish two-way
communications exceeding regular communication groups such as when in an emergency. The repeater can
communicate without reorganizing the communication group.
To make an Unaddress Call, "Off" is configured in Selcall on PTT by using KPG-174D. An Unaddress Call is
initiated by selecting the DMR digital channel where "Off" is configured in Selcall on PTT and then pressing the PTT
(microphone) switch.
When the repeater initiates an Unaddress Call, the repeater transmits the Destination ID with "$FFFFE0" configured.
Configuration using KPG-174D
Configuring Selcall on PTT (
FUNC (E)/Ver 2.50
Edit > Channel Information > Channel Edit)
See
Edit > Channel Information > Channel Edit)
See
Edit > Channel Information > Channel Edit)
See
CONTENTS INDEX 53