Toggling The Capability To Transmit By Using The Ptt (Microphone) Switch Between Enabled And Disabled (Local Tx Enable/Disable) - Kenwood TKR-D710 Function Reference

4 TRANSMISSION/ RECEPTION/ REPEAT
4.8 Toggling the Capability to Transmit by Using the PTT (microphone) Switch between Enabled and Disabled
4.8 Toggling the Capability to Transmit by Using the PTT (microphone)
Switch between Enabled and Disabled (Local TX Enable/Disable)
Local TX Enable/Disable is the function to enable or disable the capability to transmit by using the PTT
(microphone) switch.
When Local TX Disable is enabled, if the PTT (microphone) switch is pressed, a Warning Alert Tone (1 beep)
sounds from the repeater and the repeater cannot transmit.
Transmission by using the PTT (microphone) switch can be toggled between enabled and disabled when a PF key is
operated, when a signal is applied to an AUX Input port, or when the repeater is turned on.
Table 4-10 Toggling the Capability to Transmit by Using the PTT (microphone) Switch between Enabled and Disabled
Trigger
PF key
AUX Input Port
Startup
Note
• If Local TX Disable is enabled while the repeater is transmitting, the repeater immediately ends the transmission by using the
PTT (microphone) switch.
• If a PTT configured to have a priority lower than the PTT (microphone) switch is available for transmission when the repeater
ends transmission by using the PTT (microphone) switch by enabling Local TX Disable while the repeater is transmitting, the
repeater switches the modulation signal line and continues transmission.
(Refer to Configuring the Priority Order of Transmission (PTT
FUNC (E)/Ver 2.50
Assigned Function
Local TX Enable/Disable
Local TX Disable
Local TX Enable
Local TX Enable/Disable
Local TX Disable
Local TX Enable
Priority).)
See
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
CONTENTS INDEX 22