Rear Panel - Kenwood TKR-D710 Function Reference

1 FUNCTIONS AND PANEL LAYOUT

1.2 Rear Panel

1.2 Rear Panel
1
3
TX OUT
1
Connects a transmitting antenna.
CONTROL I/O (D-Sub 25-pin Connector)
2
Connects an external device and an external
controller.
TEST/SPKR (D-sub 15-pin Connector)
3
Available for the input and output test. This
connector also connects an external speaker.
REF IN
4
Not used.
RX IN
5
Connects a receiving antenna.
FUSE
6
Stops automatically supplying the power source to
the repeater if the current running through the
repeater exceeds a certain amount.
FUNC (E)/Ver 2.50
2 4 5
8
Figure 1-2 Rear Panel
6 7
DC IN
7
Connects DC 13.2 V power source.
N SYNC 1, 2
8
Connects the repeater with KTI-5, an optional
network interface unit, if the repeater is used via
Conventional IP Network.
Note
Connect the repeater with KTI-5 by using the following
part:
E30-7717-XX (an N-SYNC cable attached to KTI-5) (1 m)
CONTENTS INDEX 2