Configuring User List To Be Enabled Or Disabled (User List (Group Id)/ User List (User Id)) - Kenwood TKR-D710 Function Reference

7 DMR DIGITAL COMMUNICATION
7.9 Limiting the IDs for Repeat Transmission (User List (Group ID)/ User List (User ID))

Configuring User List to Be Enabled or Disabled (User List (Group ID)/ User List (User ID))

Whether the configurations of User List (Group ID) and User List (Unit ID) are enabled or disabled can be
configured for each channel by using KPG-174D.
In a system where user limit is used, all Unit IDs may be temporarily enabled for a reason such as an operation
check. With this function, a system administrator can temporarily release the right to use the repeaters without
deleting the User List (Group ID) and User List (Unit ID).
If this function is enabled, the repeater sends only calls using the ID permitted in the User List (Group ID) and User
List (Unit ID) to a receiving subscriber unit.
If this function is disabled, the repeater sends all calls made using the DMR digital signal to the receiving subscriber
unit.
If this function is disabled, the repeater sends all calls made using the DMR digital signal to the receiving subscriber
unit.
However, the received Color Code needs to match the Color Code preconfigured for the repeater as the basic
condition to repeat in all cases.
According to the configuration of User List (Group ID) and User List (User ID), the repeater behaves as follows:
Configuration
User List (Group ID)
User List (Unit ID)
FUNC (E)/Ver 2.50
Table 7-6 User List (Group ID)/ User List (Unit ID)
None
Group ID List
Group ID Range
None
Unit ID List
Unit ID Range
Group ID List and Group ID Range are disabled.
Group ID List is enabled, and Group ID Range is disabled.
In order to repeat a Group Call, the use of the repeater needs to be
permitted for the target Group ID.
(Refer to Configuring the Group IDs Permitted for Repeat
Transmission (Group ID List).)
Group ID Range is enabled, and Group ID List is disabled.
In order to repeat a Group Call, the use of the repeater needs to be
permitted for the target Group ID.
(Refer to Configuring the Group IDs Permitted for Repeat
Transmission All at Once (Group ID
Unit ID List and Unit ID Range are disabled.
Unit ID List is enabled, and Unit ID Range is disabled.
In order to repeat an Individual Call or Group Call, the use of the
repeater needs to be permitted for the received Unit ID.
(Refer to Configuring the Unit IDs Permitted for Repeat Transmission
(Unit ID List).)
Unit ID Range is enabled, and Unit ID List is disabled.
In order to repeat an Individual Call or Group Call, the use of the
repeater needs to be permitted for the received Unit ID.
(Refer to Configuring the Unit IDs Permitted for Repeat Transmission
All at Once (Unit ID Range).)
Description
Range).)
CONTENTS INDEX 57