Continuing Transmission For A Certain Length Of Time After Various Transmissions End; Call Hangtime - Kenwood TKR-D710 Function Reference

7 DMR DIGITAL COMMUNICATION

7.6 Continuing Transmission for a Certain Length of Time After Various Transmissions End

7.6 Continuing Transmission for a Certain Length of Time After
Various Transmissions End
The following functions continue transmission for a certain length of time after various communications in the DMR
format end:
•

Call Hangtime

• Data Hangtime
• Channel Hangtime (Mixed Channel)
• Channel Hangtime (DMR Channel)
Call Hangtime
Call Hangtime is the function that is used to retain a channel for a certain length of time after the repeater ends
transmission of an audio signal.
The repeater starts repeat transmission after a subscriber unit transmits an audio signal. The repeater retains a
channel and continues repeat transmission for the length of time configured in Call Hangtime after the repeater
ends transmission of an audio signal.
Call Hangtime can be toggled between enabled and disabled when a PF key is operated, when a signal is applied
to an AUX Input port, or when the repeater is turned on.
Trigger
PF key
AUX Input Port
Startup
Note
• While the Call Hangtime is counting down, the repeater does not start repeat transmission even if the repeater receives an
analog signal on a channel with "Mixed" configured in Channel Type.
• Call Hangtime is enabled only for the transmission of a DMR digital signal. If "Mixed" is configured in Channel Type, a test
tone is activated when the factor for transmission by the repeater is repeating a DMR digital signal.
Configuration using KPG-174D
Configuring Call Hangtime (
PTT)
FUNC (E)/Ver 2.50
Table 7-3 Toggling Call Hangtime Between Enabled and Disabled
Assigned Function
Call Hangtime Enable/Disable
Call Hangtime Disable
Call Hangtime Enable
Call Hangtime Enable/Disable
Call Hangtime Disable
Call Hangtime Enable
Edit > Optional Features > Common Page 1 > Repeater/ Network/ Console
See
See
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
CONTENTS INDEX 50