4 TRANSMISSION/ RECEPTION/ REPEAT
4.9 Toggling All Transmissions by Using PTT Controls Between Enabled and Disabled (TX Enable/Disable)
4.9
Toggling All Transmissions by Using PTT Controls Between
Enabled and Disabled (TX Enable/Disable)
TX Enable/Disable is the function to enable or disable all transmission.
If TX Disable is enabled, all transmissions by using the following PTT controls cannot be executed:
•
Mic PTT (PTT (microphone) switch)
•
Repeat PTT
•
Network PTT
•
Console PTT
All transmissions by using PTT controls can be toggled between enabled and disabled when a PF key is operated,
when a signal is applied to an AUX Input port, or when the repeater is turned on.
Table 4-11 Toggling All Transmissions by Using PTT Controls Between Enabled and Disabled
Trigger
PF key
AUX Input Port
Startup
Note
• If TX Disable is enabled, a CW ID cannot be transmitted, and an Air Remote code or Transpond code for Remote Control
cannot be transmitted.
• If TX Disable is enabled while the repeater is transmitting, the repeater immediately ends all transmission.
• If TX Disable is enabled, a DMR digital signal cannot be transmitted from the subscriber unit to the repeater.
FUNC (E)/Ver 2.50
Assigned Function
TX Enable/Disable
TX Disable
TX Enable
TX Enable/Disable
TX Disable
TX Enable
See
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
CONTENTS
INDEX
23