About Transmission Of A Courtesy Tone By Using The Repeat Ptt Control - Kenwood TKR-D710 Function Reference

5 SOUND
5.4 Transmitting a Courtesy Tone After Transmission Ends (Courtesy Tone)

About Transmission of a Courtesy Tone by Using the Repeat PTT Control

A courtesy tone is transmitted when the transmission using the Repeat PTT control is finished after the length of
time configured in Encode Pause Time elapses.
If "Off" is configured in Repeater Hold Time, the transmission using the Repeat PTT control ends after a courtesy
tone is transmitted.
If Repeater Hold Time is configured, a courtesy tone is transmitted before the length of time configured in Repeater
Hold Time elapses. After the courtesy tone is transmitted, the transmission using the Repeat PTT control ends
when the length of time configured in Repeater Hold Time elapses.
(Refer to Continuing Transmission for a Certain Length of Time After Reception Stops (Repeater Hold
The timing of courtesy tone emission is as follows:
 If a courtesy tone is transmitted:
 If a courtesy tone is not transmitted:
The repeater does not transmit a courtesy tone if the transmission period using the Repeat PTT control is shorter
than the Encode Pause Time after a PTT having the higher priority is activated and deactivated during the
transmission using the Repeat PTT control.
PTT Priority 1: Mic PTT (PTT (microphone) switch)
PTT Priority 2: Repeat PTT
Encode Pause Time: 2 sec
FUNC (E)/Ver 2.50
Encode Pause Time
Transmission by Using the
Transmission of a
Repeat PTT Control
Courtesy Tone
Figure 5-1 Courtesy Tone 1
Encode Pause Time
Transmission by Using the
Repeat PTT Control
Figure 5-2 Courtesy Tone 2
Signal Reception (Signaling Matches.)
PTT (Microphone)
Repeat PTT ON
Switch
3 sec 3 sec
Figure 5-3 Courtesy Tone 3
Repeater Hold Time
Repeater Hold Time
Repeater
Repeater Hold Time
PTT ON
1 sec
CONTENTS
Time).)
INDEX 30