Connect The Cables - Cisco TelePresence MX200 G2 Installation Manual

Installing Cisco TelePresence MX200 G2 - Wheel Base
3

Connect the cables

C D
Thread the cables up
through the hole in the base.
Power (100-240 VAC, 50/60 Hz)
Always use the provided
power cable.
The wall socket outlet must
be easily accessible after
installation.
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
Power switch
DVI-I
HDMI
2 microphone
nd 2, 3
Audio line input
Audio line output
USB, for future use
1
For maintenance only
Reset to factory
2
settings
3
Touch
controller
1
LAN
1
Video output
2
(e.g. 2 display)
nd
Video input
2
(e.g. PC)
Microphone
3
Use the cable that is labeled
with for the Touch controller;
use the cable that is labeled
with for the LAN
Optional
Always use the provided
Cisco TelePresence Table
Microphone 20
5