Fasten Left Monitor To Floor Stand And Connect Power Cable - Cisco TelePresence MX800 Installation Manual

Installation guide for Cisco TelePresence MX800 Dual - Floor stand
7

Fasten left monitor to floor stand and connect power cable

4 × M6x90, countersunk
4 × M6x12, countersunk
1
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Enter four screws from
front and four screws from
underneath. Then, tighten
all screws.
Connect power cable
2 2
A power cable is
strapped at the rear of
the monitor. Connect it
to the close-by socket.
Let the other end
hang freely. It will be
connected to the right
monitor in step 9.
Rear view
Page 12