Attach The Stand Covers - Cisco Room Kit EQX Installation Manual

27. Attach the stand covers

Make sure all cables that will be routed in the stand are in
place before you click on the cover clips.
Stand covers and cover clips
(Box: A)
2x stand cover, horizontal
2x stand cover, vertical
1x cable outlet cover 18x cover clips
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
27.1. Tidy up cables and add cover clips
Click the clips onto the stand. The stand
covers will snap to these clips (in
Make sure that the cables are below the clips.
70
Cover clips
step 27.2).
Copyright © 2024 Cisco Systems, Inc. All rights reserved.