Table of Contents
Advertisement
23. Adjust the VESA rail position
About the pop-in / pop-out mechanism
Interface arms in pop-in mode
Interface arms in pop-out mode
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
Push to pop out
The interface arms pop out
quickly, so mind your fingers!
When the screen is hanging on
the interface arms, gently push
the screen edge at the horizontal
position where the interface arms
are mounted.
This unlocks the interface arms,
and the screen will pop out.
Push to pop in
When the screen is hanging on
the interface arms, gently push
the screen edge at the horizontal
position where the interface arms
are mounted.
This locks the interface arms in
popped-in mode.
62
If they don't lock, it's probably
because you are not able to
push them all the way in. Use the
depth adjustment wheels (see
step 26.2) to make more space
between the screen and mounting
structure. Then, try again.
Copyright © 2024 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
