Cisco Room Kit EQX Installation Manual page 19

4.3. Hang the side modules onto the beam
Repeat this for both side modules; the side modules are identical.
1. Observe the keyholes on the beam, and the large screw heads at
the back of the side modules.
These screw heads will hang in the keyholes
Keyholes for the
left side module
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
Keyholes for the
right side module
19
To avoid getting your fingers pinched between the modules,
lift a side module by holding your hands on the top and bottom
of the module; NOT on the side toward the center module.
Screw with large head,
for hanging the module
on the beam.
Rear view of side module
Copyright © 2024 Cisco Systems, Inc. All rights reserved.