Cisco Room Kit EQX Installation Manual page 40

12.3. Snap the camera onto the bracket
1. Observe the small hinges below the camera. They will
snap onto the bracket in step 4.
Hinges
2. Observe these fixing points under the camera bracket.
They will be used to secure the camera cables in step 5.
Fixing points
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
3. Thread the cables down the hole by the camera bracket.
C2
C1
40
4. Click the camera hinges onto the bracket, without
pinching or disconnecting the cables.
C3
Make sure the camera sits firmly in
place by gently trying to pull it.
5. To avoid accidentally pulling out the camera cables,
secure them to the fixing points under the camera
bracket with the supplied nylon cable ties.
Copyright © 2024 Cisco Systems, Inc. All rights reserved.