Finish-Up - Cisco Room Kit EQX Installation Manual

Hide thumbs Also See for Room Kit EQX:
Table of Contents

Advertisement

28. Finish-up

D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
72
1. Remove protection foils from the screens.
2. Connect the HDMI (S1, S2) and power (S3, S4) cables to
the screens.
3. Also connect the screen power cables (S3, S4) to a wall
socket outlet.
4. Connect the system to the Ethernet (E1) and power (E3)
outlets.
The power switches on the camera, codec, and 24 V
PSU must be ON.
5. Follow the instructions on-screen
Choose product type "Room Kit EQX" when
prompted.
If choosing the wrong product type, the system will
not work as expected. You will have to factory reset
the codec and run the set-up wizard again to fix the
issues.
Copyright © 2024 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents