Insert The Camera - Cisco Room Kit EQX Installation Manual

12. Insert the camera

Camera
1x camera (Box: Camera)
3x nylon cable ties (Box: Center kit)
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
12.1. Set the camera tilt angle to 10°
There are two sliders for adjusting the camera tilt angle at
the bottom of the camera.
10°
Flip down the hinges and move the sliders to
the required tilt angle for this product.
Flip the hinges back when done.
39
12.2. Connect cables to the camera
1. Connect cables to the camera (C1, C2, C3). Let the other
end hang freely for now.
2. Check that the camera power switch is On.
10°, which is
Copyright © 2024 Cisco Systems, Inc. All rights reserved.
Camera
C1 C2 C3