18. Mount the top covers
Place the top covers as shown in the illustration. Left and
right first, then the center top cover. The covers shall rest on
the rubber grommets an both ends.
To avoid rattling noise, make sure the covers doesn't touch
any metal parts. Also, make sure not to interfere with the
antenna cables.
Covers
(Box: A)
2x
top cover (left and right)
1x
top cover (center)
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
1
2
48
1
Copyright © 2024 Cisco Systems, Inc. All rights reserved.