Programming Example - Casio KX-101 Operation Manual

Programming Example
* The encircled numbers , ®,... in the music and operating steps are the measure
numbers. Please use them for orientation during operation. (These measure numbers are the
same for the 3 channels MONO, POLY, CHORD.)
- ©
* [e], [e] , etc. show the chord names.
* Symbols such as [2
rests,
ir] etc, represent repetition symbols.
* [Tone] [rae] etc. show the
, B], etc. represent the durations of notes and chords, Bietc. represent
*
rogramming of tone colors, [Sama] etc. the start of a rhythm,
a rhythm stop, the unison effect.
HFS
—53—