Phone Screen Features; Clean The Phone Screen; Differences Between Phone Calls And Lines - Cisco 7800 Series User Manual

CISCO 7800 SERIES

Phone Screen Features

The phone screen shows information about your phone such as directory number, active call and line status,
softkeys, speed dials, placed calls, and phone menu listings. The screen is made up of three sections: the
header row, the middle section, and the footer row.
Figure 3: Cisco IP Phone 7800 Screen
The following table describes the Cisco IP Phone 8800 phone screen.
Table 9: Cisco IP Phone 8800 Screen Information
1 At the top of the screen is the header row. The header row displays the phone number, current
date and time, as well a number of icons. The icons display when features are active.
2 The middle of the phone screen displays the information associated with the line and feature
buttons on the phone.
3 The bottom row of the screen contains the softkey labels. Each label indicates the action for the
softkey button below the screen.

Clean the Phone Screen

Procedure
If your phone screen gets dirty, wipe it with a soft, dry cloth.
Caution Do not use any liquids or powders on the phone because they can contaminate the phone components
and cause failures.

Differences Between Phone Calls and Lines

We use the terms lines and calls in very specific ways to explain how to use your phone.
• Lines—Each line corresponds to a directory number or intercom number that others can use to call you.
You have as many lines as you have directory numbers and phone line icons. Depending upon how your
phone is configured, you could have up to 16 lines.
• Calls—Each line can support multiple calls. By default, your phone supports four connected calls per
line, but your administrator can adjust this number according to your needs.
Only one call can be active at any time; other calls are automatically placed on hold.
GoMomentum.com 12
USER GUIDE
888.538.3960