Change The Viewing Angle Of Your Phone; Connect To The Network; Onboard Your Phone With Activation Code - Cisco 7800 Series User Manual

Your Phone
Step 5
Return the handset to the handset rest.

Change the Viewing Angle of Your Phone

You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.
Procedure
Step 1 Unplug the phone from the network.
Step 2
Place the phone so that the keypad faces the desktop.
Step 3 Grasp one side of the footstand with one hand and place your other hand on the phone.
Step 4
Hold down the phone and pull up on the footstand.
Step 5 Turn the footstand over.
Step 6
Push the footstand back into the phone until the stand locks into place.
Step 7 Place the phone upright and plug it into the network.

Connect to the Network

You need to connect the phone to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1
Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2 Press Continue.
The phone completes the onboarding process automatically.
Step 3 If an error message displays, enter the code again or contact your administrator for a new code.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
Change the Viewing Angle of Your Phone
11