Video Tutorial; Requirements; Identifying Phone Model; Phone Firmware - Cisco 8851 User Manual

Hide thumbs Also See for 8851:

Table of Contents

This Congifuration Guide is written as a general guide on how to configure the Cisco phone

model 8851 to work with PBXware 5.3.8.

Video Tutorial

Please refer to the video tutorial explaining the auto-provisioning setup for a Cisco phone on

PBXware 5.

To start and successfully complete the registration of your Cisco phone, you need to know which

phone model to set up.

On the back of each Cisco phone, there is model information that you should check. Although

various phone models can have exactly the same requirements and installation procedures,

phone models can also have significantly different requirements and installation procedures, so

that is why it is important to know the model you own which results in you setting up the device

successfully.

Make sure that your phone is loaded with an appropriate firmware version, 11-3-3.

To find out the software version for Cisco 8851, press the menu button, then type 71

Fully configured and operational DHCP server.

Table of Contents