Table of Contents
Advertisement
4. Troubleshooting
4.9. Adjustment
4.9.1. Adjusting the ADF(DSDF) skew
1) Stand the ADF unit. Loosen 2 screws securing both hinge units slightly.
2) Adjust the position of the ADF hinge as the skew status.
a) If the skew image is like a below sample, adjust the hinge unit to the direction of arrow. (1 scale => 1.0 mm
skew adjustment)
4-219
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
