Fuser_Exit Drive Unit; Side Door Open Sensor - Samsung MultiXpress K7 Series Service Manual

3. Disassembly and Reassembly

3.3.20. Fuser_Exit Drive unit

1. Remove the rear cover. (Refer to 3.3.2.) 3. Unplug the motor connector. Remove 4 screws. And
release the Fuser/Exit Drive unit.
2. Remove the Fuser Fan duct. (Refer to 3.3.19.)

3.3.21. Side Door open sensor

1. Remove the rear cover. (Refer to 3.3.2.)
2. Remove the Fuser/Exit Drive unit. (Refer to 3.3.20.)
3. Unplug the connector. Remove 1 screw. And release
the side door open sensor.
3-34 Copyright© 1995-2017 SAMSUNG. All rights reserved.