► Error Code
U3–3511 / U3–3613 / U3–3614
U3–3611 / U3–3613 / U3–3614
► Error message
Original paper jam in the exit area of scanner
► Symptom
Jam has occurred in exit area of the DSDF unit.
► Troubleshooting method
NOTE
To see the troubleshooting video for this error, click through to the link below.
•
U3–3511 :
http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_U3-3511.html
•
U3–3611 :
http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_U3-3611.html
•
U3–3613 :
http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_U3-3613.html
•
U3–3614 :
http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_U3-3614.html
1) Find and remove the jammed paper.
2) If this error occurs continually, push the locking lever and pull down the Scan Out.
3) Check the Scan Out sensor and Exit sensor. If the sensor is defective, replace it(0604–001381).
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-178