Maintenance Parts - Samsung MultiXpress K7 Series Service Manual

2.2.9. Maintenance Parts

Some of the machine's parts have shorter life span than machine's life.
To ensure that the machine produces good copies and to extend its service life, it is recommended that these maintenance
parts at specific intervals be replaced as instructed.
Item
Development Unit
Fuser Unit
PTB (Paper Transfer Belt)
Pick-Up / Forward / Reverse(Separation)
roller
(for Tray X)
MP Pick-Up / Forward / Reverse(Separation)
roller
DSDF Pick-Up roller Assy
DSDF Reverse(Separation) roller Assy
DSDF Pick-Up roller Assy
DSDF Reverse(Separation) roller Assy
NOTE
• Depending on the print patterns and job mode used, the lifespan may differ.
• Refer to Chapter 3.2.2 for replacing the maintenance parts.
Maintenance Table
•
EM : Emergency Maintenance (as Needed)
•
C : Clean
•
R : Replace
NOTE
The period as shown in the table means lifespan for each maintenance parts.
Section Item
Waste Toner Container
Waste Toner
Around Waste Toner
Container
Toner Cartridge
Drum Unit
Imaging Unit Development Unit
Around Toner Pipe
Paper Dust Stick
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Part Code
JC96-09829A
JC91-01194A
JC91-01195A
JC93-01117A
JC93-01092A
JC93-00540B
JC97-04624A
JC97-04588A
JC97-04650A
JC97-04915A
EM 45K 50K
C
C
C R
C
C
C
C
2. Product Specifications and Description
Life
1,200,000 pages
360,000 pages
300,000 pages
360,000 pages
200,000 pages
200,000 pages
100,000 pages
200,000 pages
100,000 pages
100K 200K 300K
R
Remark
@ A4/Letter LEF , 4
pages/job , Simplex
Mode , 6% Coverage
220V
110V
For LX model
For LX model
For GX model
For Gx model
360K 450K 1200K
R
R
2-17