Setting Standard Tone - Samsung MultiXpress K7 Series Service Manual

A3 mono copier

Table of Contents

4. Troubleshooting

4.7.12. Setting Standard Tone

1. Setting Standard Tone

To adjust the color tone to the standard set by factory.

After first machine installation, this functions must be executed.

1) Load A4 or Letter with SEF (Short Edge Feeding) direction on tray.

2) Select [Setting] on main UI.

3) Log in as Admin.

4) Select [Adjustment] -> [Tone Adjustment] -> [Setting Standard Tone].

5) Select "OK" on confirmation window.

6) The scan ID chart will be printed out.

7) Load the chart on platen glass. (Horizontal direction)

8) Start scan.

9) When the scan complete window appears, select "OK".