Indicator Status When An Error Occurs - Casio CX-E1 User Manual

Indicator Status When an Error Occurs

Fan error
POWER/STANDBY
STATUS
Power has turned off automatically due to a fan problem. Confirm that the POWER/STANDBY
indicator is lit red (without flashing) and that the fan has stopped. After checking the POWER/
STANDBY indicator, disconnect the AC adapter (or battery) from the projector and wait for all of the
projector's indicators to go out. Next, reconnect the AC adapter (or battery) and turn projector power
back on. If the error occurs again when you turn power back on, contact your retailer or nearest
authorized CASIO Service Center.
System Errors and Other Operation Problems
POWER/STANDBY
STATUS
The projector was automatically turned off because of a system problem or because of an operational
problem caused by external noise. After confirming that the POWER/STANDBY indicator is lit red
(without flashing), disconnect the AC adapter (or battery) from the projector and wait for all of the
projector's indicators to go out. Next, reconnect the AC adapter (or battery) and turn the projector
back on. If the error occurs again when you turn power back on, contact your retailer or nearest
authorized CASIO Service Center.
Light Source Unit Problems
POWER/STANDBY
STATUS
The projector was turned off automatically because the light source unit turned off or did not turn on.
After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the AC
adapter (or battery). Wait for a short while and then reconnect the AC adapter (or battery) and turn on
the projector again. If the error occurs again when you turn power back on, contact your retailer or
nearest authorized CASIO Service Center.
Memory Error
POWER/STANDBY
STATUS
Power has turned off automatically due to a projector memory error. Confirm that the POWER/
STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator,
disconnect the AC adapter (or battery) from the projector and wait for all of the projector's indicators
to go out. Next, reconnect the AC adapter (or battery) and turn projector power back on. If the error
occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service
Center.
: Lit red
: Flashes amber (Approximately 0.5-second intervals)
: Lit red
: Lit red
: Lit red
: Flashes red (at approximately 1-second intervals)
: Lit red
: Flashes red (at approximately 2-second or 1-second intervals)
71