Correcting Vertical And Horizontal Keystoning Manually - Casio CX-E1 User Manual

Correcting Vertical and Horizontal Keystoning Manually

You can use the procedure below to correct for vertical and horizontal keystoning caused by the
positioning of the projector in relation to the projection surface.
 You can adjust keystoning vertically and horizontally within a range of ±30° each.
 Your projector performs automatic vertical keystone correction.*
the relationship between the projector and projection surface makes it impossible to achieve a
normal-looking image using automatic keystone correction alone. In step 2 of the procedure below,
you can adjust the Vertical Keystone Correction operation while checking the projection image.
*1 When "On" is selected for "Option Settings 1 3 Auto Keystone Correction" (page 58).
1.
Press the [MENU] key to display the Frequent Functions Menu.
 This displays the Frequent Functions Menu with "Vertical Keystone Correction" selected.
2.
Use the [] and [] keys to change the Vertical Keystone Correction setting.
3.
Press the [] key to select "Horizontal Keystone Correction".
4.
Use the [] and [] keys to change the Horizontal Keystone Correction setting.
5.
After the settings are the way you want, press the [MENU] key.
Note
 The operations below can be performed using the remote controller.
– In place of step 1, press the [KEYSTONE +] or [KEYSTONE –] key.
– In steps 2 and 4, use the [KEYSTONE +] and [KEYSTONE –] keys to change the settings.
1
However, there are times when
47