Changing The Color Mode - Casio CX-E1 User Manual

Aspect Ratio Setting Details
Normal Projects at the projector's maximum possible size while maintaining the input signal aspect ratio.
Full Projects at the projector's maximum possible size by enlarging or reducing the input signal.
16:9 This setting specifies a 16:9 aspect ratio, which is the same as a movie screen, high-definition TV, etc.
Using this setting when the input signal is a 16:9 image that has been squeezed to a 4:3 image causes
the image to be displayed with its normal 16:9 aspect ratio.
16:10 This setting specifies a 16:10 aspect ratio. Use this setting to adjust the image for projection onto a
16:10 aspect ratio screen.
4:3 Regardless of the input signal aspect ratio, the image is always resized to an aspect ratio of 4:3 for
projection.
True Projects each input source dot as a projector output pixel dot. If the input signal resolution exceeds
the projector's output resolution, the excess is cut off.
Letter Box This will resize the image horizontally to 1280 dots and project 800 vertical dots of the center of the
image, maintaining the aspect ratio of the input signal.
For details about how the aspect ratio setting affects the projected image, see "Aspect Ratio Setting
and Projection Image" (page 77).

Changing the Color Mode

You can select from among several different color mode settings to select the one that matches your
projection content and environment.
Important!
 You cannot change the Color Mode while "On" is selected for the "Bright Mode" setting (page
49).
1.
Display the Setup Menu (page 50).
2.
Use the [] and [] keys to select "Image Adjustment 1" and then press the
[ENTER] key.
3.
Use the [] and [] keys to select "Color Mode" and then press the [ENTER]
key.
4.
Use the [] and [] keys to select one of the color modes below and then press
the [ENTER] key.
Standard:
Graphics:
Theater:
Natural:
Use this setting when you want to highlight the colors of your presentation.
Use this setting when you want photographs and graphics to appear natural.
Use this setting to bring out the dark portions of your images.
Use this setting when projecting images of nature or people.
52