Casio CX-E1 User Manual page 44

2.
On computer A, which is already network-connected to the projector, start up C-
Connection and then click  (start projection).
 The projector will detect network input from Computer A and automatically switch its input
source to "Network".*
 At this time, the HDMI connection between Computer B and the projector will be maintained.
Switching the input source to "HDMI" (step 3, below) will resume HDMI projection of the
Computer B screen.
3.
Switch the input source from "Network" to "HDMI" to see what happens.
1. Press the [MENU] key to display the Frequent Functions Menu.
2. Use the [] and [] keys to select "Switch Input".
3. Press the [ENTER] or [] key.
•This switches the input source from "Network" to "HDMI" and starts HDMI projection of the
Computer B screen.
•For details about how to manually switch the input source, see "Changing the Input Source"
(page 50).
4.
On Computer A, click the C-Connection Y (end projection) and then click 
(start projection).
 Network input will be paused and then restarted. The projector will detect the restarted input
and automatically switch the input source back to "Network".*
the Computer A screen.
*1 A projector can network project from up to four terminals (computers, smart devices) at one time.
The projector will automatically switch the input source to "Network" only if new network
projection is started while no other terminal is currently network projecting. If another terminal is
already network projecting, the input source will not switch automatically if a second or
subsequent terminal starts network projection.
1
This will start network projection of the Computer A screen.
44
1 This will resume projection of