Optionally Available Remote Controller - Casio CX-E1 User Manual

Optionally Available Remote Controller

You can use the optionally available wireless remote controller (YT-161) to perform projector
operations. Point the remote controller signal emitter at the signal receiver on the projector as you
perform remote controller key operations. The maximum range of the remote controller signal is
approximately 5 meters (16.4 feet) (between signal emitter and receiver).
Important!
 To avoid running down the batteries, store the remote control unit so its keys are not pressed
inadvertently.
Note
 Depending on your projector model, certain remote controller keys are disabled.
CX-E1: Gray shaded keys, plus [INPUT], [VOLUME +], and [VOLUME –]
CX-F1: Gray shaded keys
 Specifications are subject to change without notice.

Remote control signal emitter

Turns power on or off.

Press to exit the currently displayed menu or to cancel an
operation.

Use the cursor keys ([][][][]) to move between menu
items, and to change setting values. Press the [ENTER] key to
select a menu item or to execute a function.

Press each of these keys to execute their functions. For
information about the function of each key, see "Operating the
Projector" (page 43).
42