Casio CX-E1 User Manual page 59

Use this menu item:
Option Settings 1 3
Restore Menu Defaults
Option Settings 2 3
Audio Out
Option Settings 2 3
High Altitude
Option Settings 2 3
Control Panel Lock
Option Settings 2 3
Timer Function
Option Settings 2 3
Restore Menu Defaults
3
1
Network Settings*
Wireless LAN Info
3
1
Network Settings*
Network Settings 3
IP Setting(LAN1)
3
Network Settings* 1
Network Settings 3
Wireless LAN Function
3
Network Settings* 1
Network Settings 3
Wireless LAN Mode
3
1
Network Settings*
Network Settings 3
Update Network Settings
3
1
Network Settings*
Network Settings 3
Initialize Network Settings
To do this:
Return all of the items in the "Option Settings 1" menu to their initial defaults for the
currently projecting image source.
Specify whether audio input from the input sources should be output to the
projector's speaker (Speaker*) or output to an external destination from the
projector's AUDIO OUT terminal (Line).
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
 Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Disable projector unit key operations.
See "Control Panel Lock" (page 55) for more information.
Display the timer function menu (page 64).
Return all of the items in the "Option Settings 2" menu to their initial defaults for the
currently projecting image source.
View information about the current wireless LAN connection status.
Specifies how an IP address is specified when the projector is connected to a
network.
Auto*: IP address is obtained automatically from a network DHCP server.
Manual: Manual IP address input.
When "Manual" is selected, settings for the following items can also be specified
manually: "IP Address", "Subnet Mask", "Default Gateway".
Toggle the projector's wireless LAN function between "Enable"* and "Disable".
Select either of the settings below as the projector's Wireless LAN Mode.
Access Point*: In this mode, the projector operates as a wireless LAN access point.
Client: In this mode, the projector operates as a wireless LAN client. Select this
mode when you want to connect the projector to an external wireless LAN
access point.
Note that before selecting this mode you first need to use your computer to
configure settings (to connect the projector to a wireless LAN access point).
For details, refer to "Connecting the Projector to an Existing Wireless LAN
Access Point" in the separate Network Function Guide.
Apply changes to the "Network Settings 3 Network Settings" menu items to
projector settings.
Return network settings to their initial factory defaults.
59