Changing the Input Source
The procedure below toggles the current input source setting between "Network" and "HDMI".
1.
Press the [MENU] key to display the Frequent Functions Menu.
2.
Use the [] and [] keys to select "Switch Input".
3.
Press the [ENTER] or [] key.
This toggles the input source setting and closes the menu.
Note
The operation below can be performed using the remote controller.
– In place of steps 1 and 2, press the [INPUT] key.
This displays the Frequent Functions Menu with "Switch Input" selected.
Using the Setup Menu
You can use the Setup Menu to adjust the projected image (brightness, contrast, etc.) and to change
other projector settings.
Displaying the Setup Menu
1.
Press the [MENU] key to display the Frequent Functions Menu.
2.
Press the [] key, select "Setup Menu", and then the [ENTER] key.
This displays the Setup Menu.
50
(Network model only)