Figure 7-10 Add Media - Honeywell 60 Series Configuration Manual

•
Server name: Enter a name for the server setting.
•
URL: Enter the URL of the HTTP server.
•
User name: Enter the user name if necessary.
•
Password: Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click TEST. The result will be shown in a
pop-up window. If successful, you will receive a test.txt file on the HTTP server.
Click SAVE SERVER to enable the settings.
Add Media
Click Add media to open the media setting window. You can specify the type of media that will
be sent when a trigger is activated. A total of 5 media settings can be configured. There are
three choices of media types available: Snapshot, Video Clip, and System log. Select the item
to display the detailed configuration options. You can configure either one or all of them.

Figure 7-10 Add Media

Media type – Snapshot
Select to send snapshots when a trigger is activated.
•
Media name: Enter a name for the media setting.
•
Source: Select to take snapshots from any of the video streams.
•
Send pre-event images:
The camera has a buffer to temporarily hold data up to a certain limit. Enter a number to
decide how many images to capture before a trigger is activated. Up to 7 images can be
generated.
•
Send post-event images:
Enter a number to decide how many images to capture after a trigger is activated. Up to 7
images can be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7,
a total of 15 images can be generated after a trigger is activated.
•
File name prefix
Enter the text that will be appended to the front of the file name.
Configuring Video Analytics
65