Figure 6-7 Multicast Settings - Honeywell 60 Series Configuration Manual

•
The RTCP (Real-time Transport Control Protocol) allows the camera to transmit the data
by monitoring the Internet traffic volume. By default, the RTCP port for video is set to
5557.
The ports can be changed to values between 1025 and 65535. The RTP port must be an even
number and the RTCP port is the RTP port number plus one, and thus is always an odd
number. When the RTP port changes, the RTCP port will change accordingly.
RTP port for metadata: By default, the RTP port for metadata is set to 6556.
RTCP port for metadata: By default, the RTCP port for video is set to 6557.
Multicast settings for streams: Click to display the detailed configuration information.

Figure 6-7 Multicast Settings

Always multicast: Check to enable multicast for video streams.
Multicast group address: Enter the Multicast group address.
Multicast video port/Multicast RTCP video port: The ports can be changed to values
between 1025 and 65535. The multicast video port must be an even number and the
multicast RTCP video port number is the multicast video port number plus one, and thus is
always odd. When the multicast video port changes, the multicast RTCP video port will
change accordingly.
Multicast metadata port/Multicast RTCP metadata port: The ports can be changed to
values between 1025 and 65535. The multicast metadata port must be an even number and
the multicast RTCP metadata port number is the multicast metadata port number plus one,
and thus is always odd. When the multicast metadata port changes, the multicast RTCP
metadata port will change accordingly.
Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the
range a packet can be forwarded. The default value is 15.
Configuring Network Settings
49