Image Adjustment; Defog; 3D Noise Reduction - Honeywell 60 Series Configuration Manual

Fixed current: Select it and the camera will use current color temperature value.
Manual: You may manually tune the color temperature by dragging the R Gain and B Gain
slider.

Image Adjustment

Brightness: Adjust the image brightness level (0% to 100%).
Contrast: Adjust the image contrast level (0% to 100%).
Saturation: Adjust the image saturation level (0% to 100%).
Sharpness: Adjust the image sharpness level (0% to 100%).
Gamma curve: Adjust the image sharpness level (0.45 to 1, Detailed to Contrast).
•
Optimize: The system automatically adjusts the gamma curve.
•
Manual: Drag the slider to change the preferred level of Gamma correction towards higher
contrast or towards the higher luminance for detailed expression for both dark and
lighted areas of an image.
The Gamma curve function is disabled when the WDR feature in
Note
Exposure settings is enabled.

Defog

Check to improve the visibility quality of captured image in poor weather conditions such as
smog, fog, or smoke.

3D Noise Reduction

Drag the slider to adjust the reduction strength (from low to high).
3D Noise Reduction is mostly applied in low-light conditions. In a
Note low-light condition with fast moving objects, trails of after-images
may occur. You may then select a lower strength level.
All changes made to image settings are directly shown on screen.
Note To recall the original settings without incorporating the changes,
click RESTORE. After you completed the settings, click SAVE.
Configuring Camera Settings
29