Honeywell 60 Series Configuration Manual page 4

Hide thumbs Also See for 60 Series:
Table of Contents

Advertisement

Cautions and Warnings
WARNING
and experienced technicians to conform to all local codes and to maintain your
warranty.
WARNING
Certified/UL Listed LPS or Class 2 power adapters are required. Power over
Ethernet (PoE) shall be provided by listed Information Technology Equipment
meeting the IEEE 802.3af PoE standard. The PoE is not intended to be connected
to exposed (outside plant) networks.
The Ethernet connection is not intended to be connected to exposed (outside
plant) networks. Do not connect two power sources to the camera at the same time.
WARNING
employed when powering the camera from 24 V AC.
Caution
Regulatory Statements
Photo biological safety
This product fulfills the requirements for photo biological safety according to IEC/EN 62471
(risk group 1).
General Data Protection Regulation
Please be aware that this product can store personal data.
Personal data is protected by the General Data Protection Regulation (2016/679) in Europe
and therefore the owners of personal data have obtained certain rights thanks to this
regulation.
ii
Installation and servicing should be performed only by qualified
To ensure compliance with electrical safety standards, CSA
To comply with EN50130-4 requirements, a UPS should be
Invisible LED radiation (850 nm). Avoid exposure to beam.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents