Cisco Unified 7821 User Manual page 23

The Meet Me conference begins when the host connects. Participants who call the conference
before the host has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end
when the host disconnects.
Host Meet Me Conference
Procedure
Step 1Obtain a Meet Me phone number from your system administrator.
Step 2Distribute the Meet Me phone number to participants.
Step 3 When you are ready to start the meeting, lift the handset to get a dial tone
and then press Meet Me.
Step 4Dial the Meet Me phone number.
Join Meet Me Conference
Procedure
Step 1Dial the Meet Me phone number that the conference host provided.
Step 2 If you hear a busy tone, the host has not yet joined the conference. In this
case, hang up and try your call again.
Speed Dial
Speed Dial allows you to press a button and enter a preset code to place a call. Before you can
use Speed Dial features on your phone, you must set up speed-dial on your Self Care Portal.
Depending on setup, your phone can support these Speed Dial features:
•
Speed-dial buttons: Allow you to quickly dial a phone number from one or more line
buttons that are set up for speed dialing.
•
If your system administrator has set up the Line Status feature, you can monitor the status
of a speed-dial line by using the line status indicators.
ISO 9001:2015 Certified ................................Soaring Heights in Transforming Industry and Economy