Cisco Unified 7821 User Manual page 17

Park Call Using Manual Directed Call Park
Procedure
Step 1During a call, press Directed Call Park on a line that displays an idle Line
Status indicator.
Step 2Retrieve the call from any other Cisco IP Phone in your network as follows:
Step 3 If you do not retrieve the call within the time that your system administrator
has set, you receive an alert tone. At that time, you can:
•
•
Park Call Using Manual Directed Call Park
Procedure
Step 1
During a call, press Transfer
Step 2Enter the Directed Call number where you will park the call.
Step 3Press Transfer again to finish parking the call and then hang up.
Step 4Retrieve the call from any other Cisco IP Phone in your network as follows:
a)
b)
Step 5 If you do not retrieve the call within the time that your system administrator
has set, you receive an alert tone. At that time, you can:
ISO 9001:2015 Certified
Enter the park retrieval prefix.
a)
Dial the Directed Call number.
b)
Press Resume to resume the call on your phone.
Retrieve the call from another phone.
.
Enter the park retrieval prefix.
Dial the Directed Call number.
•
Press Resume to resume the call on your phone.
•
Retrieve the call from another phone
................................Soaring Heights in Transforming Industry and Economy