Cisco Unified 7821 User Manual page 21

Calling Features
Conference
Conference allows you to talk simultaneously with multiple parties. When you are on a call, you
can use Conference to dial another party and add the party to the call. Alternately, if you have
multiple phone lines, you can use Conference to combine calls across two lines.
Before you complete a conference procedure, you can press the Cancel softkey to cancel the
procedure. You can also press the Swap softkey to toggle between calls and allowing you to speak
privately with each party.
As the conference host, you can remove individual participants from the conference.
Add Third Party to Conference
Procedure
Step 1Verify that you are on an active call (not on hold).
Step 2 Press Conference.
Step 3 Enter the phone number for the party that you want to add or press a speed dial
button.
Step 4Wait for the party to answer, or skip to step 5 while the call is ringing.
Step 5 Press Conference again. The conference begins.
Step 6(Optional) Repeat these steps to add more parties, if desired.
Combine Calls to Create Conference
Before You Begin
You require multiple phone lines to perform this task.
Procedure
Step 1Verify that you have two connected calls and that one of the calls is active (not
on hold).
Step 2 Press Conference.
Step 3Press the line button for the other (held) call.
ISO 9001:2015 Certified ................................Soaring Heights in Transforming Industry and Economy