Chapter 8
Troubleshooting
•
Copying the User Log
You can view the log file by copying it to an external source or to disk. This command copies
both log files to the local SCE 2000 platform disk or any external host running a FTP server.
To copy the user log to an external source, use the following command:
From the SCE 2000# prompt, type logger get user-log file-name
ftp://username:password@ipaddress/path and press Enter.
The SCE 2000# prompt appears.
To copy the user log to an internal location, use the following command:
From the SCE 2000# prompt, type logger get user-log file-name target-
filename
The SCE 2000# prompt appears.
Viewing the User Log
This command is not recommended when the user log is large. Copy a large log to a file to view it (see
Note
Copying the User Log
To view the user log:
From the SCE 2000
The user log appears, followed by the SCE 2000
OL-7824-04
Viewing/clearing the User Log counters
and press Enter.
(on page 8-5))
prompt, type more user-log and press Enter.
#
prompt.
#
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Troubleshooting Tools
8-5