Cisco SCE 2000 4xGBE Installation And Configuration Manual page 111

Chapter 7 Basic SCE 2000 Platform Operations
One of the useful show commands is the show version command. This command displays
global static information on the SCE 2000 as software and hardware version, image build time,
system uptime, last open packages names and information on the SLI application assigned.
To show the version information for the SCE 2000 software and hardware, complete the
following steps:
At the SCE 2000# prompt, type show version.
The system shows the version information.
SCE 2000#show version
System version: Version 2.5.2 Build 240
Build time: Jan 11 2005, 07:34:47
Software version is: Version 2.5.2 Build 240
Hardware information is:
rx
dp
tx
ff
cls
cpld
Lic
rev
Bootrom
L2 cache
lic type
optic mode
Part number: 53AA-BXC1-AAAA
Revision: A02A
Software revision: G001
Serial number: 043P6982
Power Supply type: AC
SML Application information is:
Application file: /tffs0/temp.sli
Application name:
Application help:
Original source file:
H:\work\Emb\jrt\V2.5\sml\actions\drop\drop_basic_anyflow.san
Compilation date: Wed, September 22, 2004 at 21:25:21
Compiler version: SANc v2.50 Build 32 gcc_codelets=true built on: Tue
September 22 2004 09:51:57 AM.;SME plugin v1.1
Default capacity option used.
Logger status: Enabled
Platform: SCE 2000 - 4xFE
Management agent interface version: SCE Agent 2.5.1 Build 18
Software package file:
ftp://vk:vk@10.1.8.22/P:/EMB/LatestVersion/2.5.2/se1000.pkg
SCE 2000 uptime is 21 minutes, 37 seconds
SCE 2000#
OL-7824-04
: 0x0075
: 0x1808
: 0x1708
: 0x0077
: 0x1721
: 0x0025
: 0x0176
: G001
: 2.1.0
: Samsung 0.5
: MFE
:
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Managing SCE 2000 Configurations
7-5