Httpfeedback Commands; Xcommand Httpfeedback Deregister; Xcommand Httpfeedback Register; Peripherals Commands - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

HttpFeedback commands

xCommand HttpFeedback Deregister

Deregister XML feedback over HTTP(S).
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Deregister FeedbackSlot:
where
FeedbackSlot: Integer (1..4)
You can have from 1 to 4 slots for feedback.

xCommand HttpFeedback Register

Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Register [FeedbackSlot: FeedbackSlot] ServerUrl:
"ServerUrl" [Expression[1..15]: "Expression[1..15]"]
where
FeedbackSlot: Integer (1..4)
You can have from 1 to 4 slots for feedback.
ServerUrl: String (1, 2048)
Define the URL for the HTTP(S) server.
Expression[1..15]: String (1, 255)
XPath expressions specify which parts of the Status and Configuration XML documents
are monitored. You can have from 1 to 15 XPath expressions.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
FeedbackSlot
xCommand xCommand

Peripherals commands

xCommand Peripherals Connect

Register peripherals that are connected to the codec, such as control systems and touch
panels. The registered peripherals are displayed on the web interface under Configuration >
Peripherals.
This command should be used when the peripheral connects to the codec for the first time
or when the software version on the peripheral has changed. The list of connected devices is
available with the command xStatus Peripherals ConnectedDevice [n] Status.
Requires user role: ADMIN, USER
USAGE:
xCommand Peripherals Connect [HardwareInfo: "HardwareInfo"] ID: "ID" [Name:
"Name"] [NetworkAddress: "NetworkAddress"] [SerialNumber: "SerialNumber"]
[SoftwareInfo: "SoftwareInfo"] Type:
where
HardwareInfo: String (0, 100)
The device's hardware number.
ID: String (1, 100)
A unique ID for the device you are connecting to, typically a MAC address.
Name: String (0, 100)
Define a name for the device.
NetworkAddress: String (0, 100)
Network address for the device you are connecting to.
SerialNumber: String (0, 100)
The device's serial number.
SoftwareInfo: String (0, 100)
Software version the device is running.
Type: Byod/ControlSystem/Other/TouchPanel
Define the type of device you are connecting to.
107
API Reference Guide
xStatus Appendices
Type
Copyright © 2016 Cisco Systems, Inc. All rights reserved.