Cisco TelePresence SX20 Codec
Introduction
Provisioning commands
xCommand Provisioning CompleteUpgrade
Starts installing the software upgrade if you wish to install it before it is set to do so.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning CompleteUpgrade
xCommand Provisioning PostponeUpgrade
Postpones the installing of the software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone:
where
SecondsToPostpone: Integer (0..65534)
Set how long to postpone the upgrade. The value is in seconds.
xCommand Provisioning StartUpgrade
The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning StartUpgrade
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
SecondsToPostpone
xCommand
xCommand
Proximity commands
xCommand Proximity Services Activate
Reactivate the Proximity services that were deactivated with xCommand Proximity Services
Deactivate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Activate
xCommand Proximity Services Deactivate
This command deactivates all proximity services on the endpoint. To reactivate proximity
services use the command xCommand Proximity Services Activate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Deactivate
115
API Reference Guide
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.