Presentation Commands; Xcommand Presentation Start; Xcommand Presentation Stop - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction
set to 10, the ResultSet will contain only 10 entries (Contacts and Folders) even if the total
number of hits is larger. The maximum limit is 1000.
Recursive: False/True
This parameter will only have effect when searching the local phone book. The setting
determines whether a local phone book search should be limited to the given FolderId, or
also recursively search in its subfolders. If not specified, the search will be recursive.
When issuing the command without specifying any parameters, all folders, contacts and
contact methods in the local phone book will be returned.
ContactType: Any/Folder/Contact
Search all contact types, or limit the search to folders or individual contacts.
Tag: Untagged/Favorite
Limits the search to either contacts that have been tagged as favorite or the untagged
contacts.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xCommand xCommand

Presentation commands

xCommand Presentation Start

Open a media stream from the selected presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Start [PresentationSource: PresentationSource] [SendingMode:
SendingMode] [ConnectorId: ConnectorId] [Instance: Instance]
where
PresentationSource: Integer (1..2)
Select the video input source to be used for presentation, identified by source number.
SendingMode: LocalRemote/LocalOnly
Select whether the presentation is shown locally or locally and remotely.
ConnectorId: Integer (1..2)
Select the video input source to be used for presentation, identified by connectorId.
Instance: New/1/2/3/4/5/6
Select which local presentation instance you wish to start.

xCommand Presentation Stop

Stop the media stream from the presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Stop [Instance: Instance] [PresentationSource:
PresentationSource]
where
Instance: 1/2/3/4/5/6
Select which local presentation you wish to stop, identified by presentation instance.
PresentationSource: Integer (1..2)
Select which local presentation you wish to stop, identified by source number.
114
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.